Reinstalling and Upgrading OS

Upgrading EVO II OS takes approximately 5 minutes and requires just a few clicks; the process is almost entirely automated.

important

Before you begin, note that this OS distribution is customized for the EVO II render engine. Attempting to install it on a different configuration may lead to unwanted results.

caution

Before proceeding, it is highly recommended to back up your data, as the installation completely erases the EVO II hard drive. Each upgrade involves a fresh installation.

Requirements

• A USB device with a minimum of 16GB capacity

Steps

1. Log in to your Zero Density Customer Account via the Zero Density Customer Portal.
2. Download the 22H2EVOII-B45.iso file.
3. Create a bootable USB flash drive with the ISO file using a tool of your choice, such as Rufus.
4. Plug the USB into the EVO II computer and restart the system.

Installation Welcome Screen

5. Press F2 on your keyboard, as illustrated above.

Boot Device Selection

6. Press F8, and on the next screen, select the boot device and press ⏎ Enter.

info

In our example, we selected UEFI: KIOXIA TransMemory PMAP, Partition 2 (30.9 GB), as shown in the image above. Your screen may vary, as UEFI: KIOXIA TransMemory PMAP reflects the USB brand and may differ depending on the device you use.

Proceeding Screen

7. Press any key to boot from the ISO, as illustrated above.

Language, Time, and Keyboard Input Selection

8. Confirm Windows language, time, and keyboard settings by clicking Next.

important

It is highly recommended to use English (United States) as the language for installation.

License Terms

9. Check the box to accept the license terms, then click Next.

info

The license terms you accept include the Microsoft Windows EULA and other related licenses.

Installation Completed

10. Wait for the installation to finish, then click the Restart now button.

Your system is now upgraded and ready to use.