Skip to main content
Version: Reality 5.3.sp3

Configuration

info

Before you begin, please note that the Reality Connector must be installed on the Engine to be monitored.

Configuration

  • Click on the Main Menu and navigate to Modules > Hardware Monitor.

Hardware Monitor Configuration

  • Expand the Hardware Monitor menu on the left panel.
  • Define a Prometheus URL.
info

Hardware Monitor requires Prometheus event monitoring application. Prometheus is installed and preconfigured during the Reality Hub installation. The Hardware Monitor will use port number 9090 as the default port.

Example:

http://<REALITY HUB SERVER>:9090

  • Set a Plot Range Query time.
info

In this section, you can choose data points over a time range ranging from 1 minute to 12 hours. You also have the flexibility to adjust this range within the Plot Graph.

  • Add Hardware Monitor Server Instance.
info

Hardware Monitor Server Instance refers to an Engine that hosts the Prometheus.

Main Menu

  • Click on the Main Menu and navigate to Modules > Hardware Monitor.

Enabling Engine

  • Click on the Engines tab, then click on the Show checkbox.

Engine Enabled

As soon as your Engine is enabled, its hostname also become available in the Metric Display area and Specs section, as shown in the image above.

Enabling Metrics

  • Navigate to the Metrics section and activate one, several, or all of them according to your preference.