Skip to main content
Version: Reality 5.4 SP1

AJA Configuration

Before you begin to install and configure AJA drivers and firmware, make sure that you uninstalled all AJA related entities because this process requires clean installation.

  • Supported Driver Version: 16.2.4.6
  • Firmware Date: 2021/09/16 14:33:45
Card VariantFirmware Name
Corvid44 12G BNCc44_12g_8k_tprom_2021-12-19.bit
Corvid 44 BNCcorvid_44_2021-09-16.bit
Corvid88corvid_88_2021-11-30.bit
info

The following guide will utilize a configuration method for AJA Corvid 44 BNC card, but it is also applicable to other certified AJA drivers.

Preparations

Windows Start Menu

  • Click on the Windows Start button, find the Add or remove programs and run it.

Apps & Features

  • Type AJA in the search box, uninstall anything related to AJA.

Computer Management

  • Click on the Windows Start button, find the Computer Management and run it.

Computer Management

  • Go to System Tools > Device Manager > Other Devices and check if your AJA Device is present.

Installations

In this stage you have to conduct following operations:

  • AJA Driver Installation
  • AJA Firmware Check
  • AJA Firmware Update (Optional)

AJA Driver Installation

Reality 5.3 Folder

  • Enter the Reality 5.4 SP1 Setup Folder.
  • Go to Package > AJA > and click on the ntv2driver-16.2.4 installer package.
info

The AJA Driver Installation will be carried out silently, and no warning messages will be displayed.

AJA Firmware Check

NTV2Watcher

  • Go to Setup-Reality-5.3.b447 > Package > AJA> ntv2watcher folder.
  • Double click on the ntv2watcher.exe
  • Click on the Info and check the Driver Version and Video Bitfile

If the Firmware (Video Bitfile) is not matching, proceed with AJA Firmware Update.

AJA Firmware Update

If your AJA Firmware (Video Bitfile) is not matching with your AJA Driver, then you have to update your firmware. To do that:

Running Shell Command

  • Navigate to Setup-Reality-5.3.bXXXX > Package > AJA > firmware folder.
  • Launch your preferred command shell within the AJA folder, as demonstrated above.

Running Firmware Update Command

  • Type the following command as illustrated above and hit enter on your keyboard:
\ntv2firmwareinstaller -p corvid_44_2021-09-16.bit

Firmware Update Process

Firmware update is done.

  • Restart the computer.