Skip to main content
Version: Traxis Camera Tracking 3.1

Active ID Markers and Bumped Cameras

Active ID Markers​

You do not add Active ID markers one by one as you do with anchors. When the BaseStation and Active Tag communicate correctly, Motive automatically tracks the markers and identifies their Active IDs.

If you use the Traxis bar with Active ID markers, include both marker types:

  • Select Active + Passive in current Live Pipeline settings.
  • Select Active and Passive Markers where the installed version uses Marker Labeling Mode.

Do not use Active Only for this mixed setup. Check that Motive reconstructs and tracks both the bar points and the Active ID markers.

For normal Continuous Calibration, you do not need to add tracked markers to a separate CC list. Enable Continuous Calibration in Live mode and meet the tracking requirements.

Bumped Cameras​

Bumped Cameras is a separate correction feature. Enable it to correct physical camera movement.

  1. Set Mode to Camera Samples.
  2. Choose Marker Type for your setup:
SetupMarker Type
Fixed Traxis bar assigned as anchorsAnchor Markers
Bar anchors together with Active ID markers on BroPucksAnchor and Active

Active Markers alone does not include the bar anchors.

important

Do not assign moving camera-mounted BroPuck markers as anchors. An Active ID identifies a marker. An anchor provides a fixed position reference.